Dante Bluetooth Dongle

Port

RJ45 Port

Network communication port.

Green light on indicates system is ready

Yellow light flash indicates link/data traffic.

When click the "Recognize" button (an eye-shaped symbol) on the Dante controller, Green light will flash to identify the device.

Bluetooth

1 x backlit key, blue backlight, for Bluetooth pairing.

Pairing Process

After the device is powered on, press the pairing button, the blue backlight of the button flashes quickly, indicating that the device is in the state of being connected.

After the Bluetooth device is successfully paired with it, the blue backlight of the button is always on

If the Bluetooth is not connected to any device within one minute, the blue backlight is off, the Bluetooth is turned off, and the pairing button needs to be pressed again.

In the power-on state, press and hold the button for more than 5 seconds, the backlight will turn off. At this time, the pairing will be reset, and the Bluetooth will return to the initial state.

Dante

Power

802.3af PoE

Sample Rate

48 kHz

Dante Device Latency

1,2 or 5ms (configurable using Dante Controller)

Bit Depth

24

Type

Bluetooth 2X1

Control

Control Part

(1) Bluetooth

General

Operation Temperature

-5 to +55℃

Storage Temperature

-25 to +70℃

Power Consumption

1.9W(Max)

Dimension (W*H*D)

115x 34 x 28 mm

Cable length

20cm

Net Weight

70g